Measure your Kitchen Cabinets for Refacing with Redo
Refacing cabinets in your kitchen is an excellent way to redo your kitchen without a full remodel. By refacing cabinets you can keep the well-built cabinet shells while still having a modern-looking kitchen. Doing a kitchen cabinet refacing may seem complicated. How do you even make sure the new cabinet fronts will fit? Correct measurements are important when doing any construction project. So, if you’re looking into redoing your kitchen cabinets, you’ll want to learn how to measure kitchen cabinets for refacing.
Create a Diagram
The first step is to make a diagram of the kitchen you’ll be working on. The diagram will be of each opening in the kitchen, both the drawers and the cabinets. Properly identifying all of the openings is important. If you don’t make a diagram it may be difficult to remember where each measurement goes to, since each cabinet may be slightly different. Once you have a diagram that looks similar to your kitchen you’ll be ready to start measuring the kitchen cabinets for refacing.
Start Your Measurements
To start your measurements you’ll want your diagram of the kitchen as well as a tape measure. When measuring, always measure the width before the height. The width should be measured first since that is typically how you determine which direction the wood grain should be going. Also, it may be helpful to measure from left to right, top to bottom, to help organize your measurements.
Measuring The Cabinet Spaces
One of the first things you’ll want to measure is the size of the openings of all of your cabinets and drawers. You’ll be measuring the whole located right behind the cabinet door. Measure the width first, then the height of the cabinet openings. Make a note to mark if the opening is for a double-doored cabinet. Record the numbers on your kitchen diagram.
Measuring The Doors
Most cabinet designs have doors larger than the cabinet’s opening. This is known as the door’s overlay. Measure the width and height of the cabinet doors, as well as the drawers. Be careful to match each door measurement with the corresponding cabinet opening measurement.
Measuring The Overlay
Measuring the kitchen cabinet door overlay can be done in two ways. The first way is with a tape measure. Take the tape measure and put its end inside the cabinet opening, hooking it on the side of the hole. Then, close the cabinet door with the tape measure behind the door and still on the opening. The number on the tape measure sticking out of the side of the cabinet drawer is your cabinet’s overlay.
The other way to measure your cabinet’s overlay is to find the difference between the measurements of your cabinet’s opening and its door. Once you find the difference between your two measurements, divide the number by two to account for the overlay being on both sides of the cabinet’s opening. That number is your cabinet’s overlay. Measuring the overlay is important, especially if you want the hidden style hinges.
Double Check Your Measurements
Measure twice, cut once. That is a proverb typically used by carpenters but is very useful when doing and project. By ensuring your measurements are correct you’re saving yourself time, money, and headache in the future. Always double-check, triple-check, or even quadruple-check your measurements to make sure they’re right.
Best Cabinet Refacing Service in Chicago, IL & Suburbs
It isn’t too difficult to measure kitchen cabinets for refacing. However, it can be laborious and if you get your measurements mixed up it’s frustrating. It’s far easier to have a professional do your cabinet refacing. If you’re looking into cabinet refacing in Chicagoland, Contact Redo Cabinets. We’ll give you a free quote for your kitchen. Our cabinet refacing experts are unmatched in the industry. We offer many styles and colors so you can make your kitchen one of your dreams. Also, refer to our cabinet refacing specials in Chicago, IL & Suburbs to see our latest deals!
